Read Phoenix Tables Using Python and Phoenix Thick Client

PhoenixMiner: Setting for Binance Pool, Committee, Comparison with TeamRedMiner.

In this guide, you will learn how to configure and use Phoenix Miner version v.9d and later for Ethereum mining

Download for Windows / Linux

Download releases

Download from BitcoinTalk

What is PhoenixMiner

PhoenixMiner - is a Ethash (Dagger Hashimoto) cryptocurrency miner. First of all, these are Ethereum, Ethereum Classic, Callisto and other popular coins. The program works with both AMD and Nvidia video cards. According to the developers, it is the fastest Ethereum / Ethash miner with the lowest fees.

How to gear up PhoenixMiner

Step two - Gear up up a batch file for Ethereum on Binance Pool

Open the file start.bat with Notepad ++ or any suitable text editor and edit the file start.bat. Yous must change the pool login (give-and-take after -wal). replace username1 with your pool login, or if in that location is no registration on the pool, then insert afterwards the -wal address of your wallet.

Here is an example of a Phoenix Miner .bat file for the Binance Pool:

                                      PhoenixMiner                    .exe                    -pool                                        ethash.poolbinance.com:8888                    -wal                                        username1                    -worker                                        worker_name                    -epsw                                        x                    -asm                                        2                    -dbg                                        -                    1                    -allpools                                        1                    -way                                        i                    suspension

Step 3 - Run PhoenixMiner

Save this file and then double click offset.bat to start mining. When the discussion "Accept" is displayed in the CMD window, it means that yous accept successfully submitted your solution to the pool. Further, mining statistics tin can exist viewed on the puddle. It volition appear near xv minutes after the start of mining.

Video Guide

PhoenixMiner example for Ethermine

STRATUM (pool address):	eu1.ethermine.org
PORT:	4444
Username (-wal):	0xBB942274AB3C8285400519e7F0c343Fca2394908
Password:	default

This is how the **PhoenixMiner batch file for ETH will look similar on the Ethermine pool **

batch file ethermine

To set a batch file for ETH, nosotros need to enter 5 commands one by one into the .bat file:

batch file ethermine

PhoenixMiner - the proper name of the program we are launching.
eu1.ethermine.org - the address of the mining pool.
4444 - puddle port.
0xBB942274AB3C8285400519e7F0c343Fca2394908 - the accost of the wallet to which the mining is going.

This is how the finished Phoenix Miner batch file volition look like:

                          PhoenixMiner              .exe              -pool                            eu1.ethermine.org:4444              -wal                            0xBB942274AB3C8285400519e7F0c343Fca2394908

Pay attending to the syntax. In no case are extra spaces, symbols, line breaks allowed. If at that place are actress characters, then Phoenix Miner will not start.

PhoenixMiner setup for NiceHash

Here is a batch file for NiceHesh:

                          PhoenixMiner              .exe              -pool                            stratum              +tcp://daggerhashimoto.eu.nicehash.com:3353              -wal                            16              p3MvQB7Va2cAPBahvkBePxqQtwTd77sP              -pass                            x              intermission

Each example has a word at the end of the .bat file interruption. This volition help go along the CMD window always open up. Fifty-fifty if you made a error in the syntax. In this example, the CMD console will display an inscription what the error is.

PhoenixMiner setup for Ethereum Classic

Hither is a batch file for Ether Classic:

                          PhoenixMiner              .exe              -puddle                            eu1              -etc.ethermine.org:4444              -wal                            0x7b9cc9270cF06889a4286221931D3a58e627F888              -worker                            Phoenix              -pass                            ten              pause

And for the Nanopool:

                          PhoenixMiner              .exe              -puddle                            etc              -eu              two.nanopool.org:19999              -wal                            0x7b9cc9270cF06889a4286221931D3a58e627F888              -worker                            Phoenix              -pass                            x

Monitoring and profit

After the miner sends several solutions (in about 10-xv minutes of work), you tin bank check the status of piece of work and profit on the "Income" page in your account on the exchange or on the pool that you take chosen.

Algorithms and hashrate

Algorithm	Coin	P106-100	P104-8G	1070ti	1080ti	2080	RX580, 2048sp
ethash	ETH	25 MH/s	37 MH/s	32 MH/south	46 MH/southward	43 MH/s	30 MH/s
etchash	ETC	25 MH/s	37 MH/southward	32 MH/s	46 MH/s	43 MH/s	30 MH/s
ProgPOW	BCI	ten MH/s	15 MH/due south	15 MH/due south	22 MH/s	27 MH/south	9.four MH/s
Ubqhash	UBIG	22.5 MH/s	39 MH/s	31.5 MH/s	52.5 MH/s	44.iii MH/southward	32.2 MH/s

Comparison PhoenixMiner vs TeamRedMiner

Commands

If <> is specified, then instead of <> you need to substitute the value without symbols <>.

-pool <host:port> - Puddle address (add together to hostname ssl:// for SSL connection or http:// for solo mining).

Example:
PhoenixMiner.exe -puddle ssl://eu1.ethermine.org:5555

-wal <wallet> - Wallet (some pools crave calculation a login and / or worker).

Instance with a wallet:
-wal 0xBB942274AB3C8285400519e7F0c343Fca2394908

-pass <password> - Password (for nigh pools it is not required, use information technology 10 as a password if you are not sure that the pool has a countersign).

-worker <name> - The proper name of the worker (most pools accept it as the name of your farm or wallet, y'all tin can specify any).

If is specified, then instead of you need to substitute a number without symbols <>.

-proto <n> - Selects the type of stratum protocol for the ethash pool:

miner-proxy - stratum specification for mining in proxy mode (for example, for the Coinotron pool)
eth-proxy - (eg for ethermine pools, nanopool) - this is the default, works for most pools.
qtminer (e.g. ethermine, ethpool)
EthereumStratum/i.0.0 (for example for nicehash)
EthereumStratum/2.0.0

PhoenixMiner blocked by chrome

Sometimes PhoenixMiner blocked by chrome. If you lot have upgraded the Google Chrome browser to version 91, you may have noticed that some file downloads don't piece of work anymore in the browser.

But first, here's a brief caption of why this happens, assuming you know the file you lot're trying to download is safe. Google Chrome and other web browsers will try and identify perchance malicious files. One minor flaw in this concept is that most web browsers oftentimes volition flag unknown files as malicious. This is ordinarily known as heuristics, which is a fancy word for guessing.

But here comes a trouble, files considered as unsafe by Chrome might withal exist "clean." It can exist frustrating when Chrome keeps blocking a download that y'all know it is from a trusted source.

See: How to Stop Chrome from Blocking Downloads

mining rig

Changelog

five.9d

Added support for the latest AMD Linux drivers 21.twoscore.1. There are some bugs in these drivers, particularly the clocks and voltages can't be set properly with older cards (RX4x0/RX5x0/Vega/RadeonVII);
Validated support for the latest AMD Windows drivers up to 21.11.two;
Fixed problems with AMD RX6700XT cards with the latest AMD and Linux drivers;
Fixed issues with AMD Vega and Radeon VII cards on latest Windows and Linux drivers;
Stock-still crash with very old Nvidia drivers (3xx.x);
Other fixes and pocket-size improvements

five.9c

Show the GPU vendor name in the list of GPUs to arrive easier to identify the GPUs.

5.9b

The updated list of known issues (commuter incompatibilities, etc.) and workarounds:

AMD Linux driver 21.xl.ane has a bug preventing proper setting of clocks and voltages on older cards (RX4x0/RX5x0/Vega/RadeonVII). Given that these drivers are also usually slower than the older drivers for these cards, we recommend using Linux drivers 20.30 for anything older than RX6000 series.
If y'all are using Linux drivers 21.40.1 with Radeon Seven cards, you need to add the option -fpwm one in guild to have proper fan control.
AMD Linux drivers 21.twoscore.one has finally removed the requirement of PCIe atomics but there are problems when you endeavour to mix Polaris (RX4x0/5x0) cards and Vega or newer cards on the same rig.
Some Nvidia cards volition report a lot of stale shares under Windows 11. Using the aforementioned driver version under Windows 10 resolves the upshot.

5.8c

Stock-still a crash on Linux when mining on RDNA2 AMD cards (RX6x00) with older drivers
Removed error messages when mining on fanless Nvidia cards

five.8b

Implemented optimized kernels for AMD RX6600XT cards;
Added support for the latest AMD Windows drivers (21.x.two, 21.ten.i, 21.nine.2, and 21.9.1). Note that whatever AMD cards older than Polaris (RX470/480/570/580/590) won't work with the latest AMD drivers;
Added support for the latest AMD Linux drivers 21.thirty;
The latest AMD drivers (21.nine.i and later for Windows, and 21.30 and afterward for Linux) dropped support for the older kernels, and so we changed the kernels for AMD Polaris cards to support these new drivers. In that location is a very small speed improvement (less than 0.1% on average) with the new kernels and the new drivers on Polaris cards;
Other fixes and modest improvements.

five.7b

Implemented new "turbo" kernels (-clkernel three) for AMD Polaris cards that can work with the current DAG sizes over four GB. Annotation that -clkernel three uses double the VRAM and will provide slightly faster hashrate with slightly college power consumption. You can use the -rvram command-line parameter to specify how much VRAM to exist left unused;
Increased the maximum supported DAG epoch to 600 (i.e. until nearly Sep 2023);
Implemented full hardware command for AMD RX6900/6800/6700 cards nether Linux. Note that with these cards under Linux you lot demand to specify relative cadre voltage: due east.chiliad. -cclock -50 will set the core voltage to be l mV under the default value;
Added ROCr kernels for Vega, Radeon Vii and Navi cards. With these kernels you will be able to run these cards with Linux drivers 20.45 and later but the performance volition be lower than with the older PAL drivers and kernels. Nosotros recommend using AMD Linux driver 20.30 for all cards except RX6900/6800/6700;
Fixed an consequence causing crashing with some RX6900/6800/6700 cards under Linux (there is no need to run these cards with -clkernel 0 anymore);
Added support for AMD Windows drivers up to 21.7.two. Note that Radeon Vii cards will non work with drivers 21.6.one or higher - you demand to apply older drivers for proper operation of these cards;
Added support for AMD Linux drivers upward to 21.20 (use older drivers for Vega or Radeon VII cards as they will not piece of work with 21.xx)
Numerous other fixes and minor improvements.

5.6d

Fixed problem with displaying GPU temperatures of some Nvidia GPUs.

guimondhathapasse86.blogspot.com

Source: https://miningsoft.org/en/miners/phoenixminer/